Hard wax oil OSMO 3062
Shade: transparent/ matte
Packaging: 0.75L
Characteristics:
Ideal as a colorless treatment of solid wood boards, all types of solid floors, cork floors, floor boards and OSB boards.
It is characterized by its particularly durable surface hardness and resistance to wear. It is also water resistant and insensitive to dirt. Any stains can be removed without any problems. It is enough to lightly rub the damaged areas with wax maintenance. It is not necessary to sand the entire surface, but only the damaged areas!
Hard wax oil is also very suitable for processing furniture, especially table tops. It is made on the basis of natural vegetable oils, does not crack, does not peel, is porous. Therefore, it is also suitable for use in wet areas such as bathrooms and kitchens.
Natural oils and waxes have the ability to soak deep into the wood, keeping it healthy for a long time, ensuring its elasticity and protecting it from drying out. Wood can breathe and moisture can be released. Possible waviness and expansion of the wood is reduced.
Health and environmental protection:
The oil does not contain biocides or preservatives. After drying, the coating is not sensitive to people, animals and plants.
Meets standards: DIN 53160, EURO – EN71.
Certified according to: DIN EN ISO 9001 and DIN EN ISO 14001.
Workflow:
– The surface must be clean and dry
– Small cracks need to be repaired with a repair product, e.g. EIGHT COLOR
– The material must be processed at a temperature above the freezing point
– Any old wax coatings need to be cleaned
– Varnished coatings must be removed
– If necessary, gently sand the surface and thoroughly remove dirt
With cork floors, due to the stronger absorption and high elasticity of the material, we recommend proceeding as follows:
– Apply the coating with a wide spatula so that the wax soaks in immediately
– Leave to dry for at least 24 hours
– Smaller areas of cork can be treated with a brush in a very weak layer
