5mm x 20m x 1.23m cork roll

Cork is wound in a roll of several meters, cork from the coil we cut according to normal meters.

Features

• natural and ecological product • renewable raw material • 100% recyclable and reusable • thermal insulation • acoustic insulation • anti-vibration • does not release toxic gases in case of fire • resistant to compression • retains its technical properties even after time • does not smell • does not release dangerous particles or solvents • resistant to rot and not attacked by insects or rodents • good dielectric properties •

Cork as a bulletin board - installation

In the case of gluing the cork directly to the wall, we recommend stripping the wall of paint and impregnating it. It is also possible to stick the cork, e.g. on an OSB board that you screw to the wall (the wall does not need to be painted). We glue the cork with Soliflex contact adhesive. The glue is only for absorbent surfaces, so do not glue cork, e.g. on plastic. Apply the glue both to the cork and to the base. Let it set for a few minutes and then you can stick. Ventilation in the room is important during application.